I have 2 15' DVC Volfenhag subs, i have them in a dual, ported box that has seperate chambers. Now what i did for each sub is hook the + to the + and - to - then hooked them up to the box terminal. now in the diagrams i looked at it seems like the wiring is connected between subs, im not sure. well then i was going to hook them up to my amp in 2 seperate channels. Is this correct?? the amp i have is a 2000 watt Legacy LA1990...1000.2 its 2 ohm stereo stable bridgeable into 4 ohms. Please help me. im not using them yet because i dont want to ruin them. And if this will work, is it the best way to do it? THINK
Replies (2)
ttocs on 11/30/2003 19:53:30
what is the impedence(ohms) of the voice coils? If they are a dual 4 ohm coil you will be fine. You have them in parallel and that will give you 2 ohm stereo.
BIGJ11BB on 11/30/2003 19:54:23
you are correct that will give you a two ohm load to each channel
Replies (2)
ttocs on 11/30/2003 19:53:30
what is the impedence(ohms) of the voice coils? If they are a dual 4 ohm coil you will be fine. You have them in parallel and that will give you 2 ohm stereo.
BIGJ11BB on 11/30/2003 19:54:23
you are correct that will give you a two ohm load to each channel
Copyright ClubKnowledge 2009 * All Rights Reserved
