Hello, I am looking for the knowledge to fiberglass my Blazer, I have no knowledge of how to do this. Is there any web sites to teach you basic knowledge of this?
Replies (2)
Ash on 08/23/2009 15:07:06
A sub enclosure I take it what you are talking about. There are quite a few tutorials online as well as some experienced here. There's even video you can order that go through the basics. However it is a heavy learning process and can be quite messy. Whatever you do don't rush into it. Take time to do some serious research on the materials, proper handling, and safety. I work with fiberglass at times and its not fun when you end up breathing fumes and the little hairs that float easily. There is quite a bit of prep work as well as clean up.
I'm sure others will chime in. Don't be discouraged, just take your time and learn.
basshead396 on 08/24/2009 01:57:51
You are on the right track get as much info as you can and do a couple of little projects just to get used to mixing and laying down resin and mat before you start on some thing big. Like ash said just take your time don't get in a hurry and please use some kind of breathing mask especialy when sanding, Iwould recommend doing it outside if weather permits.And above all have fun creating something you like.
Replies (2)
Ash on 08/23/2009 15:07:06
A sub enclosure I take it what you are talking about. There are quite a few tutorials online as well as some experienced here. There's even video you can order that go through the basics. However it is a heavy learning process and can be quite messy. Whatever you do don't rush into it. Take time to do some serious research on the materials, proper handling, and safety. I work with fiberglass at times and its not fun when you end up breathing fumes and the little hairs that float easily. There is quite a bit of prep work as well as clean up.
I'm sure others will chime in. Don't be discouraged, just take your time and learn.
basshead396 on 08/24/2009 01:57:51
You are on the right track get as much info as you can and do a couple of little projects just to get used to mixing and laying down resin and mat before you start on some thing big. Like ash said just take your time don't get in a hurry and please use some kind of breathing mask especialy when sanding, Iwould recommend doing it outside if weather permits.And above all have fun creating something you like.
Copyright ClubKnowledge 2009 * All Rights Reserved
