i have an older criag powerplay v-502 48 watt car amp and i need a wiring diagram.
Replies (3)
cdobson2@mainerr.com on 05/28/2009 19:52:57
swez on 05/28/2009 20:22:07
Good luck CD2. This is one old/antique player and even google does not offer much help.
How many wires are in the harness HU bundle? If we know that, there's a chance you can get it working with patience and some help from the CK Team.
As a primer, expect the following:
1 +12 volt constant power line
1 + 12 volt ACC/IGN/Run line
1 Ground is usually Black
2-4 pairs of speaker lines (These are often paired so they are easy to figure out and eliminate0
This model may not have a Dimmer or ILL power lead. It may or may not have a power antenna line or remote amp turn on wire either.
Comments?
Swez
ttocs on 05/28/2009 22:48:11
can you tell us what wire colors you have?
Replies (3)
cdobson2@mainerr.com on 05/28/2009 19:52:57
swez on 05/28/2009 20:22:07
Good luck CD2. This is one old/antique player and even google does not offer much help.
How many wires are in the harness HU bundle? If we know that, there's a chance you can get it working with patience and some help from the CK Team.
As a primer, expect the following:
1 +12 volt constant power line
1 + 12 volt ACC/IGN/Run line
1 Ground is usually Black
2-4 pairs of speaker lines (These are often paired so they are easy to figure out and eliminate0
This model may not have a Dimmer or ILL power lead. It may or may not have a power antenna line or remote amp turn on wire either.
Comments?
Swez
ttocs on 05/28/2009 22:48:11
can you tell us what wire colors you have?
Copyright ClubKnowledge 2009 * All Rights Reserved
