the trunk will be sealed from the inside
-Drew
Replies (5)
swez on 07/16/2008 06:43:37
Oh... I see some nice potential in this install. Can you install your rear coaxials on the same panel and create separate enclosures for them?
That way, all your drivers are on the same physical plane and time alignment will be great! Also, you know the polarity of the sub will be 180 degrees out of phase when mounted that way. Be sure to wire the sub/speakers accordingly.
This has potential!
Swez
newB on 07/16/2008 09:29:18
yup!! new pix will be up tonight- Coaxials are nastily installed i the opposite upper corners of the board new woof is traditionally mounted and ported!! (4" aero on axis with woof) tuned to 32hz
some issues i still need to iron out- have not gotten all the flex off the box on uber low notes... already have a game plan in motion and need to build the box/fiberglass for the 6.5s
updates soon.
-Drew
newB on 07/16/2008 11:34:39
box:
port is tuned LOW will be trimming for higher tune shortly, also so it wont stick out so far GRIN last problems to tackle are the box/fiberglass for back coaxials and finishing off the last bit of panel flex around the woofer mount
-Drew
ttocs on 07/17/2008 04:12:03
looks secure.
I can't remember, do you have an alarm?
newB on 07/17/2008 04:22:36
nope not this fimsy car. but it will come before the big amp and big woofer.
18" DC lvl 4 on 1500wrms 8cuft @38hz GRIN
-Drew
Copyright ClubKnowledge 2009 * All Rights Reserved
