ok so i hope this will make sense, i am constructing (well planning at least) to build two sealed boxes for my kicker cvr8 subs , acording to the data sheet, minimum enclosure size is.4 foot squared and max is 1.8 foot squared. now to stay in the mid range(and to fit behind the seat in the truck ) i have come up with a wedge design, heres the tricky part.the top of the wedge will be cut off flat to match the bottom, if that makes any sense.
the measurement go as follows;
witdth -24 in ,heigth 1 -10 in ,height 2- 4in, depth - 24 in , material thickness will be 3/4 in mdf for a total i got of just over 1.6 cubic feet.
just wonderin if i am doin my math right.
happy new year to all !!!!!!!!!!!!!!!GRIN
Replies (2)
cplkittle on 12/29/2007 12:13:25
I get 1.611 cubic feet.
louisypher on 12/29/2007 12:56:24
right on, thanks much. off to buy materials,have some plexiglass left over from the last box, may put a window in this one as well.maybe some sound activated LEDs,never can tell.
sweet!!gonna be some decent 8's i think.
LFV
the measurement go as follows;
witdth -24 in ,heigth 1 -10 in ,height 2- 4in, depth - 24 in , material thickness will be 3/4 in mdf for a total i got of just over 1.6 cubic feet.
just wonderin if i am doin my math right.
happy new year to all !!!!!!!!!!!!!!!GRIN
Replies (2)
cplkittle on 12/29/2007 12:13:25
I get 1.611 cubic feet.
louisypher on 12/29/2007 12:56:24
right on, thanks much. off to buy materials,have some plexiglass left over from the last box, may put a window in this one as well.maybe some sound activated LEDs,never can tell.
sweet!!gonna be some decent 8's i think.
LFV
Copyright ClubKnowledge 2009 * All Rights Reserved
