I am looking to match my MTX RT12X2A subs with an amp. The subs have a 4-ohm impedance, 400 RMS, and here is a link to them http://www.crutchfield.com/App/Produ...RT12X2A&tp=112 . I was looking at the MTX TA5302 900W Watt Amp and wasn't sure if they were compatible or the best for them. Any Suggestions would be appreciated as I am very new at this. Thank You.
Replies (1)
swez on 12/29/2007 00:11:59
The subs are the low end of the line for MTX. (Entry level) The amp noted is 300 watts RMS @ 4 ohms x 1 when bridged MONO. Not a bad match, but for less $$ and more usable power, consider Kenwood:
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=17790
Swez
Replies (1)
swez on 12/29/2007 00:11:59
The subs are the low end of the line for MTX. (Entry level) The amp noted is 300 watts RMS @ 4 ohms x 1 when bridged MONO. Not a bad match, but for less $$ and more usable power, consider Kenwood:
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=17790
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
