|
Prev :: Next
I just recently bought a 1999 Hundai Accent GL with no stereo system. I went out and bought a car stereo at walmart to install. The wiring connections codes did not match up from the stereo and the car so I looked up the codes for my car and got two different diagram codes, both of which do not match my cars. I have no idea which wires to connect because both wiring codes that I got are completely different and don't even match the color codes that are in my car. The wires in the car are as follows: SOLID green black brown COLOR/STRIPE black/white x2 black/red brown/yellow brown/red green/black green/white white/red red/yellow blue/white The wires on the stereo are as follows and they are labeled on the wire: SOLID yellow: car battery +12volts red: power + white: panel light orange: auto antenna electric ground black: ground - SPEAKERS front left speaker: green + green/white - rear left speaker: brown + brown/white - front right speaker: gray + gray/white - rear right speaker: blue + blue/white - If anyone can help me and let me know how these match up it would be greatly appreciated. Thanks! Replies (2) trunkisloud on 08/3/2007 00:29:27 easy fix man....go back to walmart and buy a wire harness for your car ..should bei in the same place as the radio came from..you can wire it up to your radio harness ..it will be color coded so you can match em up..then you simply plug the harness into the factory wiring and there it is....its about 8 dollars..... swez on 08/3/2007 09:54:20 They look like this: Hyundai/Kia Receiver Wire Harness http://www.crutchfield.com/S-6vqWpTC37kt/cgi-bin/ProdView.asp?g=103000&I=120707301 Swez Copyright ClubKnowledge 2009 * All Rights Reserved |