right now iam running a fosgate 401m or so it says on the amp its a 2 channel briggable. i also have in the basement a 301m single channel and a 201s 2 channel briggable rockford will either run with the 401m
Replies (1)
swez on 06/16/2007 04:45:01
Tom,
The 301M is more suitable to the sub pairing mentioned earlier in another post. Two channel amps are best used for mid/high speakers or 2 ohm subs.
What subs are you using now? (Make and model # please) Knowing that information, we can help you figure out a good amp to power them to full potential safely.
Mix and match amps are not always the best solution. If we know what you have now, we can show you the best ways to use what you have available and possible upgrades down the line.
Swez
PS Please answer our questions so that we can help you more efficiently. Many of us have been doing this stuff for a long time and incomplete answers only slow down the process of getting you back on track.
Replies (1)
swez on 06/16/2007 04:45:01
Tom,
The 301M is more suitable to the sub pairing mentioned earlier in another post. Two channel amps are best used for mid/high speakers or 2 ohm subs.
What subs are you using now? (Make and model # please) Knowing that information, we can help you figure out a good amp to power them to full potential safely.
Mix and match amps are not always the best solution. If we know what you have now, we can show you the best ways to use what you have available and possible upgrades down the line.
Swez
PS Please answer our questions so that we can help you more efficiently. Many of us have been doing this stuff for a long time and incomplete answers only slow down the process of getting you back on track.
Copyright ClubKnowledge 2009 * All Rights Reserved
