Thanks for your advices. I did have the two wires crossed. I switched the wires and now it's working normally, off when key is not in ignition.
But now new problems arise, the tweeters have the whining noise and the back speakers have the sizzling noise, even at every low volume. What can be the problems? Is it because not enough power? When I switched the wires, I hooked back to the original wires (the constant wire I used before was much bigger than the original). The original wires (red and yellow) seem small, look like 16 or 18 gauge. I also not using the original speaker wires. I hooked up new speaker wires to the back. When I switched the wires, the front tweeters start having whining noise, no wires from the new HU are hooked up to the original speaker wires. Please help.
Thanks
Replies (0)
But now new problems arise, the tweeters have the whining noise and the back speakers have the sizzling noise, even at every low volume. What can be the problems? Is it because not enough power? When I switched the wires, I hooked back to the original wires (the constant wire I used before was much bigger than the original). The original wires (red and yellow) seem small, look like 16 or 18 gauge. I also not using the original speaker wires. I hooked up new speaker wires to the back. When I switched the wires, the front tweeters start having whining noise, no wires from the new HU are hooked up to the original speaker wires. Please help.
Thanks
Replies (0)
Copyright ClubKnowledge 2009 * All Rights Reserved
