Alright, for those of you who like looking at the work I do, Heres some pics of the project I did today. Integrated my Ipod into my center console of my truck. All wiring runs through the consol to the adapter then straight to the Eclipe CD8445 Deck. I didnt take to many pictures because I just wanted to finish it before dark.
Work
http://i7.photobucket.com/albums/y287/SubSonicVibez/Ipod1.jpg
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod2.jpg
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod3.jpg
Finished Consol
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod4.jpg
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod5.jpg
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod6.jpg
What yall think? Constructive Feedback is always welcome.
-30
Replies (3)
newB on 05/24/2007 03:43:59
sweet man looks CLEAN!!!!
i like
-Drew
swez on 05/24/2007 06:06:51
Handy location, smart looks, intelligent design and a great fit. I like the way it's angled for ease of operation from the pilot's seat too.
"The Glassman" strikes again... CLAP
Swez
30Hertz on 05/24/2007 14:27:23
Thanks! I'm also designing some new door pods for the truck that will house my Diamond D6 6.5" Components. Decided I wanted the rear of the cab available for more sub/enclosure options since as it stands, I only have a little room to work with. I'll have a build up of those also. Maybe I'll just glass the whole door, who knows?
Work
http://i7.photobucket.com/albums/y287/SubSonicVibez/Ipod1.jpg
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod2.jpg
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod3.jpg
Finished Consol
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod4.jpg
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod5.jpg
http://i7.photobucket.com/albums/y287/SubSonicVibez/ipod6.jpg
What yall think? Constructive Feedback is always welcome.
-30
Replies (3)
newB on 05/24/2007 03:43:59
sweet man looks CLEAN!!!!
i like
-Drew
swez on 05/24/2007 06:06:51
Handy location, smart looks, intelligent design and a great fit. I like the way it's angled for ease of operation from the pilot's seat too.
"The Glassman" strikes again... CLAP
Swez
30Hertz on 05/24/2007 14:27:23
Thanks! I'm also designing some new door pods for the truck that will house my Diamond D6 6.5" Components. Decided I wanted the rear of the cab available for more sub/enclosure options since as it stands, I only have a little room to work with. I'll have a build up of those also. Maybe I'll just glass the whole door, who knows?
Copyright ClubKnowledge 2009 * All Rights Reserved
