i scored one of these off ebay for the sum of 30 bucks total. i planned on using it for my components but i got an offer that is substantially higher than what i payed for it. the guy wants to use it to run a single kicker comp vr 10 dual 4ohm sub. anyone think this baby will power it sufficiently.? the amp sports a single 20amp fuse.....duo-b circuit..if that helps.
Replies (1)
swez on 05/5/2007 10:58:35
It will power that sub, but not anywhere near the power this sub would like. If he had a 2+2 DVC version of that sub, this amp would net out about 160 Wrms when bridged to a 4 ohm load. Not bad... but this sub series likes lots of RMS power.
With a 4+4 DVC, he'd need to wire it 1 coil per channel and see about 50 Wrms/ch. A real power waster huh?
Swez
Replies (1)
swez on 05/5/2007 10:58:35
It will power that sub, but not anywhere near the power this sub would like. If he had a 2+2 DVC version of that sub, this amp would net out about 160 Wrms when bridged to a 4 ohm load. Not bad... but this sub series likes lots of RMS power.
With a 4+4 DVC, he'd need to wire it 1 coil per channel and see about 50 Wrms/ch. A real power waster huh?
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
