Why does this amp have to have a minimum 4 Ohm load if you use 2 drivers?
http://akamaipix.crutchfield.com/Manuals/575/575P3251.PDF
Replies (1)
cplkittle on 04/14/2007 20:14:04
The amplifier is 2 ohm stable, the channels are not stereo. The speaker terminals are wired parallel internally.
http://akamaipix.crutchfield.com/Manuals/575/575P3251.PDF
Replies (1)
cplkittle on 04/14/2007 20:14:04
The amplifier is 2 ohm stable, the channels are not stereo. The speaker terminals are wired parallel internally.
Copyright ClubKnowledge 2009 * All Rights Reserved
