Hey guys I have two 12" MA Audio MA121XQ, a sony xplod XM-2200GTX, with a virtual reality cubed (VR3) head unit. What would be the best setup for a subwoofer box (sealed, ported, etc.) and minimum specifiacation need fi you could. I like deep heavy bass that will shake your whole car so what would be the best amp setting and wiring possibilities since they are DVC subs. I appreciate any input you could give and any help is better than none.
Replies (3)
swez on 04/9/2007 17:10:56
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=293-311&raid=24&rak=
Optimum sealed box: 0.75 to 1.25 cu. ft.
Optimum vented box: 2 cu. ft.
Round port diameter: 4" (x 2) *Total port area: 25 sq. in. *Port length 15.5"
Swez
Zach1989 on 04/11/2007 13:49:48
which type of box would be the best for deep heavy hitting bass, and which amp setting and wiring possibilities would be the best for the type of bass I like? thank you for your input so far.
swez on 04/11/2007 17:30:26
Ported will give a nice bump in the low end bass performance. In this case, 2 round ports are recommended per sub chamber.
Wiring these subs are easy in this combo. One sub per channel, use the amp in 2 channel mode only with these subs.
If you do not have this Sony amp now, there are better choices for power and reliability when using the mentioned subs. The ideal match would be a Class D sub amp, 2 ohm stable and can deliver 500-600 watts RMS @ 2 ohms.
Swez
Replies (3)
swez on 04/9/2007 17:10:56
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=293-311&raid=24&rak=
Optimum sealed box: 0.75 to 1.25 cu. ft.
Optimum vented box: 2 cu. ft.
Round port diameter: 4" (x 2) *Total port area: 25 sq. in. *Port length 15.5"
Swez
Zach1989 on 04/11/2007 13:49:48
which type of box would be the best for deep heavy hitting bass, and which amp setting and wiring possibilities would be the best for the type of bass I like? thank you for your input so far.
swez on 04/11/2007 17:30:26
Ported will give a nice bump in the low end bass performance. In this case, 2 round ports are recommended per sub chamber.
Wiring these subs are easy in this combo. One sub per channel, use the amp in 2 channel mode only with these subs.
If you do not have this Sony amp now, there are better choices for power and reliability when using the mentioned subs. The ideal match would be a Class D sub amp, 2 ohm stable and can deliver 500-600 watts RMS @ 2 ohms.
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
