USFLAG i need info on a 96 ford explorer xlt subwoofer amplifier. wire diagram or info on the wires..
i see 7 wires total from the factory wireing..
2= output i know
2 = power (im assuming and you know what happens when you assume)
3 = input (im also assuming)
please help
Replies (6)
ShootuhMcBustaCap on 03/26/2007 21:57:30
Man, everybody has been coming with ford's lately. thats crazy.
jamesp on 03/26/2007 22:41:27
If it has the factory amplified "premium" system this link should show you the input into the factory amp as well as the speaker output from the amp. Also the power, illumination, chassis grounds and amp turn on wires. It is labeled for F-150's but is the same as some Explorers
cplkittle on 03/29/2007 00:51:02
that link brought me back to this page
ttocs on 03/29/2007 16:27:02
there is a radio integration hrns that would make it easy to diagnose and you could return the hrns when you are done with it. Go to a local shop and find a "premium integration" hrns for a ford and you can identify all the wires through that.
If you can list the wire colors I may be able to look some of them up in the books that I have. Ford likes to use red as ground, yellow as switched but other then that I am really guessing......
trunkisloud on 03/29/2007 22:29:26
hey that link brought me back to this page
jamesp on 03/30/2007 08:34:10
Dont know why the link doesnt work now. If you need it I can email it
i see 7 wires total from the factory wireing..
2= output i know
2 = power (im assuming and you know what happens when you assume)
3 = input (im also assuming)
please help
Replies (6)
ShootuhMcBustaCap on 03/26/2007 21:57:30
Man, everybody has been coming with ford's lately. thats crazy.
jamesp on 03/26/2007 22:41:27
If it has the factory amplified "premium" system this link should show you the input into the factory amp as well as the speaker output from the amp. Also the power, illumination, chassis grounds and amp turn on wires. It is labeled for F-150's but is the same as some Explorers
cplkittle on 03/29/2007 00:51:02
that link brought me back to this page
ttocs on 03/29/2007 16:27:02
there is a radio integration hrns that would make it easy to diagnose and you could return the hrns when you are done with it. Go to a local shop and find a "premium integration" hrns for a ford and you can identify all the wires through that.
If you can list the wire colors I may be able to look some of them up in the books that I have. Ford likes to use red as ground, yellow as switched but other then that I am really guessing......
trunkisloud on 03/29/2007 22:29:26
hey that link brought me back to this page
jamesp on 03/30/2007 08:34:10
Dont know why the link doesnt work now. If you need it I can email it
Copyright ClubKnowledge 2009 * All Rights Reserved
