Replies (4)
cplkittle on 01/25/2007 19:03:17
buy one more 10" sub.
just kidding...
Please give model number of amplifier and model number of subs including number of voice coils and voice coil ohms.
swez on 01/25/2007 22:00:36
I'd have to agree w/ Kit... use 2 or 4 subs with a 4 channel amp.
Tri-subs work best with Class D mono amps when they are 8 ohm subs in parallel or Class A/B amps, bridged and using 12 ohm subs in parallel.
Say more... MUCH more,
Swez
BlackGalant on 01/26/2007 06:40:59
Sorry While the Amp is A infinity 611a class D and I got 3 10in pionner 4 ohms they are 1 voice coil with a sealed box also have a cap of 1.5 frad I got yellow top battery with circuit breaker using 4gauge wire was thinking about bridging amp also wanted to know what Sensitivity: dB Lp feq and Hp feq how do i figure that out do i buy one of those volt meter things
BlackGalant on 01/26/2007 07:09:31
Also have a Pionner head unit model DEH 8600MP if you need anymore info I`ll look into it
Copyright ClubKnowledge 2009 * All Rights Reserved
