Hey again!
I have the (2) MA1200xl subs (600wRMS each, 4ohmDVC each, 1200wMAX each, being wired in parallel for 1ohm resistance)
* THINK * First off is this the correct way to wire them to 1ohm?
http://akamaipix.crutchfield.com/graphics/infolib/carlib/subs/2_4ohmDVC_1ohm.gif
* IDEA * Also, considering i wire to 1ohm, would these amplifiers work when matched with my subs??
AUDIOBAHN A12001DT ($329, 1200wRMS@1ohm)
KENWOOD KAC-9152D ($179, 900wRMS@1ohm)
MA HK2000d ($199, 1800wRMS@1ohm )
( [The last time i bought a supposedly "1ohm stable" amp form MA it started on fire...] )
*If so, which would would be my best bet?
*If not, what would you recomed?
(I jsut did a quick ebay search and found these ones up for sale. I made my best judgment as to wheather or not their specs fit what i need PROUD)
Aight i think thats all this time.
USFLAG
Replies (1)
swez on 12/21/2006 08:48:36
The wiring diagram is correct. Just make sure you observe polarity when wiring. All + terminals are wired together as a group. All - terminals are wired as the return path grouping.
Each amp mentioned is 1 ohm stable. The MA Audio is the strongest amp. (Also draws a lot of current at full power) The Kenwood is only 900 watts RMS @ 1 ohm. Bahn is the most expensive and probably the least reliable of the 3 mentioned.
Also consider HiFonics as a solid option. This one matches your sub pairing very well: Hifonics BX1205D ($200.00)
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14803
Swez
I have the (2) MA1200xl subs (600wRMS each, 4ohmDVC each, 1200wMAX each, being wired in parallel for 1ohm resistance)
* THINK * First off is this the correct way to wire them to 1ohm?
http://akamaipix.crutchfield.com/graphics/infolib/carlib/subs/2_4ohmDVC_1ohm.gif
* IDEA * Also, considering i wire to 1ohm, would these amplifiers work when matched with my subs??
AUDIOBAHN A12001DT ($329, 1200wRMS@1ohm)
KENWOOD KAC-9152D ($179, 900wRMS@1ohm)
MA HK2000d ($199, 1800wRMS@1ohm )
( [The last time i bought a supposedly "1ohm stable" amp form MA it started on fire...] )
*If so, which would would be my best bet?
*If not, what would you recomed?
(I jsut did a quick ebay search and found these ones up for sale. I made my best judgment as to wheather or not their specs fit what i need PROUD)
Aight i think thats all this time.
USFLAG
Replies (1)
swez on 12/21/2006 08:48:36
The wiring diagram is correct. Just make sure you observe polarity when wiring. All + terminals are wired together as a group. All - terminals are wired as the return path grouping.
Each amp mentioned is 1 ohm stable. The MA Audio is the strongest amp. (Also draws a lot of current at full power) The Kenwood is only 900 watts RMS @ 1 ohm. Bahn is the most expensive and probably the least reliable of the 3 mentioned.
Also consider HiFonics as a solid option. This one matches your sub pairing very well: Hifonics BX1205D ($200.00)
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14803
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
