|
Prev :: Next
i have x2 Infinity Kappa Perfect 12.1s in 1.27ft^3 sealed each. right now being pushed with a P3001 im upgrading, they are SVC 4-Ohm and i need a Class-D MONO amp. price range is around 300$ so far the best i could come up with is a Hifonics Brutus 1600 for around 260$. any advice appreciated -Drew PROUD (yes that is overpowering the subs to an extent, but its rated at 550watts at 4Ohm. when i upgrade subs in the next couple months i can re-wire them to 2Ohm (1100) or 1Ohm (1600) depending on the subs i choose... saves me buying a new amp) Replies (3) newB on 11/7/2006 02:24:34 common guys you have a good reputation... -Drew lukeduke28 on 11/7/2006 08:24:00 brutus is a good amp. i have seen/heard the brutus 1206d and 2006d. very powerful.. swez on 11/7/2006 08:46:38 These Perfect 12.1's are rated at 350 watts RMS per sub. A Class D amp rated at 600 - 800 RMS @ 2 ohms is a very good match for them. The Infinity Reference 611a is a very good match for this sub pairing and if you shop it well, am sure you can find one for well under $300.00. Here are the features and general info for this amp: http://www.crutchfield.com/S-dS0MTTWuql7/cgi-bin/ProdView.asp?g=120&I=108R611A I would not recommend an amp too much stronger than 750-800 watts RMS here. Only if you plan to get much stronger subs later. The HiFonics amps are pretty solid and many of the new generation Class D's can handle 1 ohm loads. However, when you get about 1200 watts (RMS) current draw is substantial and electrical upgrades are pretty much a given. swez Copyright ClubKnowledge 2009 * All Rights Reserved |