If you were going to buy 2 L7's 12in. would you get 2 ohm or 4 ohm . i'm not sure which ones I should get.
Replies (3)
emoboywyl on 08/29/2006 00:53:02
That's a little more complicated question than just that.
What kind of amp are you running, or planning on getting to power these subs?
massbass60 on 08/29/2006 08:30:42
I'm probably going to use this amp for now.
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16922
swez on 08/29/2006 09:34:56
If running a pair of those subs, you'll want the 2+2 DVC's. When wired correctly, your amp sees a net 2 ohm load and 500 watts RMS/sub. That's pretty strong bass.
Here's the correct wiring diagram to use:
http://img8.exs.cx/my.php?loc=img8&image=2dvcseriesvcparallelsubs0gh.jpg
Swez
Replies (3)
emoboywyl on 08/29/2006 00:53:02
That's a little more complicated question than just that.
What kind of amp are you running, or planning on getting to power these subs?
massbass60 on 08/29/2006 08:30:42
I'm probably going to use this amp for now.
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16922
swez on 08/29/2006 09:34:56
If running a pair of those subs, you'll want the 2+2 DVC's. When wired correctly, your amp sees a net 2 ohm load and 500 watts RMS/sub. That's pretty strong bass.
Here's the correct wiring diagram to use:
http://img8.exs.cx/my.php?loc=img8&image=2dvcseriesvcparallelsubs0gh.jpg
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
