Hi,
I have a unique oportunity right now to do something different with my life, and since you guys were so helpful with helping me setup my car stereo system, i thought you might have some good career ideas. I am a chemical engineer by trade so it could be related to chemicals but i wouldnt mind being an african safari tour guide either.
So, if you have any suggestions about different jobs let me know.
Replies (10)
ttocs on 07/26/2006 22:38:09
I work at intel and I know they like to hire chemical engineers. The benifits and pay are perty good but from the rumors I am hearing they are probably not going to be hiring soon. There are alot of other companies in the semicondoctor world that are hiring though.....
swez on 07/27/2006 00:58:18
Interesting that you should ask such a question... have a few comments to chew on, as you process the options that may come up.
1. Go with your instincts and trust your "gut" level intuitions
2. Look at and weigh all the benefits VS the challeneges that may come from a change in career or work place (Think it through systematically) Am I really "gifted" to do this?
3. Know our own personal strengths and multiply them as we progress in life (Personal growth and mastery people live here)
4. Know our limitations and weaknesses and either strengthen them, use other people's talents (team players) to offset our short falls or... avoid these opportunities as they tend to frustrate and side-track us more than benefit (Frustration, lack of interest and eventual failure often result here)
5. Look deep inside at what we value and are most motivated to do in life (What matters most in a persons' life... Making big money? Being well known? Helping others to grow? Being a difference maker?)
The last thing in most mens' minds are usually about what they might see after 35-40 years of "working for a living". Many will stay in one job or industry for many years and become bored and stuck in a rut. This is just a J.O.B. mentality (Just Over Broke) to most and when we look back at the whole thing, will say... "I made it through the rut stage, NOW WHAT"? Examples: Small business owners, factory workers, restaurant/hotel workers and construction laborers.
Some will try new things, learn what they need and move to the next level. These people like a fresh challenge and to stretch and grow as they go. Yes, there are points along the path that get pretty bumpy, difficult to navigate well in and full of space to grow. But if they persist and break through the rough stuff, these people tend to be well satsified with what they have accomplished and can give lots of help to others when they retire. (A wealth of knowledge, experience and willing to share such things with others) Examples: Engineers, Scientists, Teachers, Pastors, Sales,Motivational Managers and Skilled Tradesmen.
Fewer still, will actually take big risks and try many new things. They are always searching for the next gold nugget in the riverbed. However, if we remain focused, give it our best shot and can withstand the many moments of uncertanty, we can close the books knowing we have lived life on the cutting edge and it was all worth the trials and setbacks that come with such a risky, (but rewarding) adventure. Examples: Musicians, Artists, Entrepreneurs, Investment Brokers, Pro Athletes and most Big business leaders/CEO's.
Am not going to mention much on the Megalowmaniacs, Power Brokers, Politicians, Lawyers and Movie Star sector of the population. Don't know many of them. Am not sure I want to know many of them and those I have run across, ain't worth talking about.
Anyway, we all have a niche in this society. The trick is to find out what gets us all "geeked up" about it and pursue it to the max. The list above is not all inclusive, exhaustive or took many hours to research.
Each one has a function and fit into our present society. All have a purpose and are needed to one degree or another. Frankly, none of these are better or lesser than another. It just depends on what a person seems most gifted and interested about, we can pursue it.
Finally, there are many types of tests and career finder tools out there these days. One of the best I have encountered to date, is the Meyer's/Briggs personality profile analysis test. There are other tests out there as well. The M/B test is a very good start for someone who is looking for a great fit, based on personality preferences, experiences in life and how one sees the world. Give it a try!
http://www.humanmetrics.com/cgi-win/JTypes2.asp (free and fast)
http://personalitydesk.com/ (fee and comprehensive)
Comments?
Swez
emoboywyl on 07/27/2006 03:19:24
Hey! Don't say mean things about lawyers, I'm in Law School! =)
swez on 07/27/2006 11:11:26
OK, I'll try to be fair-handed on Lawyers. But if you look at most good joke books and quips, Lawyers get more than their fair share of "pot-shots". Must be a reason for that, just not sure why??? ;-)
Actually, have met and worked with mayby a dozen lawyers in the past 30 years. Of that 12 or so, my "personal experience" with them is definitely mixed. There have been 4 of them that stand out as excellent and note worthy servants of the law and very good with their clients and knowledge of "the system".
The other 8 were pretty good at doing what they focused on... looking out for their own interests and enlarging their bank accounts at others expenses. Pretty much the same average (25%) as other occupations and people in general.
What type of legal services are you planning to focus on in the future there Wyl? (just curious) Whatever your path, make it a goal to be in the top 25% of your choosen professional pusuits. Doing that, insures one of a good income and a very positive reputation.
Swez
PS The last law firm I was referred to was: "Dewey, Cheathem & Howe" Obviously, looked for another referral. LOL GRIN
cplkittle on 08/3/2006 15:25:07
Plastics
I have done several $10,000+ home theater, multi-room, dedicated theater systems for people in this area that are in the plastic industry. As a 12 volt tech, I see more and more plastic in vehicles. It is in homes, hospitals, recreation, cars, boats, decks, ... it is everywhere. And the push is for lighter, stronger, more durable cost effective material.
What your goal should be is to replace abs plastic with dkh plastic ;)
I see alot of plastics replacing glass as well.. fiberoptics for example. Tv screens, furniture, binoculars, the list goes on and on and on.
Descent on 08/4/2006 00:17:00
Hey Plastics!
I'm a machinist and I do a lot of work with plastic extrusion and injection tooling. Not sure if it would be the best career field to look into now, a lot of manufacturing is heading off to China.
swez on 08/4/2006 11:21:52
We (USA) seen to have a real problem with future prospects in manufacturing jobs. The Midwest and East coast are losing mfg work to cheaper labor that is now being done off shore, Mexico or the southern USA. Many companies are also prunning the rank and file with Factory Automatation technology too. Machines and computers do the bulk of the work now. Here, programmers, service techs and skilled labor are in high demand.
These not only affect the people that work in manaufacturing, but also folks in Management, Engineering and supply acqusitions like Purchasing and IQC jobs too.
Would have to agree that Plastics, synthetics and other man-made products are definitely a place to hang your hat. Places like DuPont, Monsanto and the petro-chemical industry, (In general) seem to have a pretty good demand stream for R&D PhD's, Engineers, formulators, Processing Control Engineers and Techs.
Swez
cplkittle on 08/7/2006 12:16:39
I know the extrusion and tooling is being done overseas, but the chemical processes is what I was referring to seeing that he is a chemical engineer.
I need a plastic that is more durable and does not bubble under heat when molding for example. ABS is easy to use, but if you get it too hot it bubbles like a cheese pizza. same with plexiglass. I know the needs in the custom fabricaion part of car audio is not a big market, but it could be applicable elsewhere.
dkh on 08/9/2006 20:56:52
Have you tried polyethylene? Ok here is an idea, go to a local polyethylene pipe manufacturer or the like and obtain some of there discards. They should have clumps of it somewhere near there extruders, (ask the operators smoking by the bay doors where it is, dont pick it up hott or you will be burned).
Ok, now heat it with a tiger torch, (propane torch). Dont put it directly in the flame for too long or it will light on fire, just heat it till it sweats.
Now with grannies oven mitts she knit you for christmas last year, grab the goopy plastic and form it, and then cool it with water or not if you want.
you can do anything
swez on 08/9/2006 21:23:15
Funny... LOL... Grannies (Granny's) hand nitted oven mitts might not be adequate for the heat. Try welder's gloves or heavy leather gloves here bud. Don't want to burn the fingerprints off the "digital manipulators" now do we?
Swez
I have a unique oportunity right now to do something different with my life, and since you guys were so helpful with helping me setup my car stereo system, i thought you might have some good career ideas. I am a chemical engineer by trade so it could be related to chemicals but i wouldnt mind being an african safari tour guide either.
So, if you have any suggestions about different jobs let me know.
Replies (10)
ttocs on 07/26/2006 22:38:09
I work at intel and I know they like to hire chemical engineers. The benifits and pay are perty good but from the rumors I am hearing they are probably not going to be hiring soon. There are alot of other companies in the semicondoctor world that are hiring though.....
swez on 07/27/2006 00:58:18
Interesting that you should ask such a question... have a few comments to chew on, as you process the options that may come up.
1. Go with your instincts and trust your "gut" level intuitions
2. Look at and weigh all the benefits VS the challeneges that may come from a change in career or work place (Think it through systematically) Am I really "gifted" to do this?
3. Know our own personal strengths and multiply them as we progress in life (Personal growth and mastery people live here)
4. Know our limitations and weaknesses and either strengthen them, use other people's talents (team players) to offset our short falls or... avoid these opportunities as they tend to frustrate and side-track us more than benefit (Frustration, lack of interest and eventual failure often result here)
5. Look deep inside at what we value and are most motivated to do in life (What matters most in a persons' life... Making big money? Being well known? Helping others to grow? Being a difference maker?)
The last thing in most mens' minds are usually about what they might see after 35-40 years of "working for a living". Many will stay in one job or industry for many years and become bored and stuck in a rut. This is just a J.O.B. mentality (Just Over Broke) to most and when we look back at the whole thing, will say... "I made it through the rut stage, NOW WHAT"? Examples: Small business owners, factory workers, restaurant/hotel workers and construction laborers.
Some will try new things, learn what they need and move to the next level. These people like a fresh challenge and to stretch and grow as they go. Yes, there are points along the path that get pretty bumpy, difficult to navigate well in and full of space to grow. But if they persist and break through the rough stuff, these people tend to be well satsified with what they have accomplished and can give lots of help to others when they retire. (A wealth of knowledge, experience and willing to share such things with others) Examples: Engineers, Scientists, Teachers, Pastors, Sales,Motivational Managers and Skilled Tradesmen.
Fewer still, will actually take big risks and try many new things. They are always searching for the next gold nugget in the riverbed. However, if we remain focused, give it our best shot and can withstand the many moments of uncertanty, we can close the books knowing we have lived life on the cutting edge and it was all worth the trials and setbacks that come with such a risky, (but rewarding) adventure. Examples: Musicians, Artists, Entrepreneurs, Investment Brokers, Pro Athletes and most Big business leaders/CEO's.
Am not going to mention much on the Megalowmaniacs, Power Brokers, Politicians, Lawyers and Movie Star sector of the population. Don't know many of them. Am not sure I want to know many of them and those I have run across, ain't worth talking about.
Anyway, we all have a niche in this society. The trick is to find out what gets us all "geeked up" about it and pursue it to the max. The list above is not all inclusive, exhaustive or took many hours to research.
Each one has a function and fit into our present society. All have a purpose and are needed to one degree or another. Frankly, none of these are better or lesser than another. It just depends on what a person seems most gifted and interested about, we can pursue it.
Finally, there are many types of tests and career finder tools out there these days. One of the best I have encountered to date, is the Meyer's/Briggs personality profile analysis test. There are other tests out there as well. The M/B test is a very good start for someone who is looking for a great fit, based on personality preferences, experiences in life and how one sees the world. Give it a try!
http://www.humanmetrics.com/cgi-win/JTypes2.asp (free and fast)
http://personalitydesk.com/ (fee and comprehensive)
Comments?
Swez
emoboywyl on 07/27/2006 03:19:24
Hey! Don't say mean things about lawyers, I'm in Law School! =)
swez on 07/27/2006 11:11:26
OK, I'll try to be fair-handed on Lawyers. But if you look at most good joke books and quips, Lawyers get more than their fair share of "pot-shots". Must be a reason for that, just not sure why??? ;-)
Actually, have met and worked with mayby a dozen lawyers in the past 30 years. Of that 12 or so, my "personal experience" with them is definitely mixed. There have been 4 of them that stand out as excellent and note worthy servants of the law and very good with their clients and knowledge of "the system".
The other 8 were pretty good at doing what they focused on... looking out for their own interests and enlarging their bank accounts at others expenses. Pretty much the same average (25%) as other occupations and people in general.
What type of legal services are you planning to focus on in the future there Wyl? (just curious) Whatever your path, make it a goal to be in the top 25% of your choosen professional pusuits. Doing that, insures one of a good income and a very positive reputation.
Swez
PS The last law firm I was referred to was: "Dewey, Cheathem & Howe" Obviously, looked for another referral. LOL GRIN
cplkittle on 08/3/2006 15:25:07
Plastics
I have done several $10,000+ home theater, multi-room, dedicated theater systems for people in this area that are in the plastic industry. As a 12 volt tech, I see more and more plastic in vehicles. It is in homes, hospitals, recreation, cars, boats, decks, ... it is everywhere. And the push is for lighter, stronger, more durable cost effective material.
What your goal should be is to replace abs plastic with dkh plastic ;)
I see alot of plastics replacing glass as well.. fiberoptics for example. Tv screens, furniture, binoculars, the list goes on and on and on.
Descent on 08/4/2006 00:17:00
Hey Plastics!
I'm a machinist and I do a lot of work with plastic extrusion and injection tooling. Not sure if it would be the best career field to look into now, a lot of manufacturing is heading off to China.
swez on 08/4/2006 11:21:52
We (USA) seen to have a real problem with future prospects in manufacturing jobs. The Midwest and East coast are losing mfg work to cheaper labor that is now being done off shore, Mexico or the southern USA. Many companies are also prunning the rank and file with Factory Automatation technology too. Machines and computers do the bulk of the work now. Here, programmers, service techs and skilled labor are in high demand.
These not only affect the people that work in manaufacturing, but also folks in Management, Engineering and supply acqusitions like Purchasing and IQC jobs too.
Would have to agree that Plastics, synthetics and other man-made products are definitely a place to hang your hat. Places like DuPont, Monsanto and the petro-chemical industry, (In general) seem to have a pretty good demand stream for R&D PhD's, Engineers, formulators, Processing Control Engineers and Techs.
Swez
cplkittle on 08/7/2006 12:16:39
I know the extrusion and tooling is being done overseas, but the chemical processes is what I was referring to seeing that he is a chemical engineer.
I need a plastic that is more durable and does not bubble under heat when molding for example. ABS is easy to use, but if you get it too hot it bubbles like a cheese pizza. same with plexiglass. I know the needs in the custom fabricaion part of car audio is not a big market, but it could be applicable elsewhere.
dkh on 08/9/2006 20:56:52
Have you tried polyethylene? Ok here is an idea, go to a local polyethylene pipe manufacturer or the like and obtain some of there discards. They should have clumps of it somewhere near there extruders, (ask the operators smoking by the bay doors where it is, dont pick it up hott or you will be burned).
Ok, now heat it with a tiger torch, (propane torch). Dont put it directly in the flame for too long or it will light on fire, just heat it till it sweats.
Now with grannies oven mitts she knit you for christmas last year, grab the goopy plastic and form it, and then cool it with water or not if you want.
you can do anything
swez on 08/9/2006 21:23:15
Funny... LOL... Grannies (Granny's) hand nitted oven mitts might not be adequate for the heat. Try welder's gloves or heavy leather gloves here bud. Don't want to burn the fingerprints off the "digital manipulators" now do we?
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
