I am looking for some ideas about how to get my remote working. It is a Compustar 2WSS-AS. When I try to program the remote, I get the two clicks from the brain . I install the battery into the remote as the instructions say but nothing ever happens. I don't get the one click and then the beep from the remote or the two clicks when it is coming out of programming mode. The only thing I get is three beeps from the remote. Of course the remote does not work. Any ideas what I am doing wrong? Thanks
Replies (1)
cplkittle on 06/23/2006 18:47:15
if it is a 2way remote it should play a little jingle when you put the battery in. if it does not, then it is screwed.
Programming should be ignition-acc 5 times leaving it in the ignition position and press lock on each remote. You can also call compustar technical support, they are pretty good about trying their best to get you up and running.
Replies (1)
cplkittle on 06/23/2006 18:47:15
if it is a 2way remote it should play a little jingle when you put the battery in. if it does not, then it is screwed.
Programming should be ignition-acc 5 times leaving it in the ignition position and press lock on each remote. You can also call compustar technical support, they are pretty good about trying their best to get you up and running.
Copyright ClubKnowledge 2009 * All Rights Reserved
