Alright, I just installed my brank new Audiobahn a2002t to my speakers and it sounds great. Only problem is it only sounds great from the right side. The left side only gives static, and I know it's the amp because I eliminated all other possible problems with different wiring. I tried to check out if anything visible was wrong, but the cover didn't want to come off, and I didn't want to break it anymore. I don't have a warranty, so does anyone know what this could be. You can hear music from the left side, but with very loud static, even when music isn't playing.
Replies (2)
swez on 02/1/2006 08:17:47
Here are a few things to try:
1. Try swapping the L&R inputs on the amp
2. Is the HU and amp properly grounded to the floor pan?
3. When you unplug both RCA inputs, is the noise still there?
4. Try using an alternate audio source (Walkman or similar) to the amp inputs and see if the noise goes away
If this is brand new, contact the seller and explain the problem, request a return authorization and send it back for replacement. Most sellers will honor a D.O.A. and S.O.A. product.
Swez
ttocs on 02/1/2006 15:25:07
also try switching the speaker outputs and see if the problem moves.
Replies (2)
swez on 02/1/2006 08:17:47
Here are a few things to try:
1. Try swapping the L&R inputs on the amp
2. Is the HU and amp properly grounded to the floor pan?
3. When you unplug both RCA inputs, is the noise still there?
4. Try using an alternate audio source (Walkman or similar) to the amp inputs and see if the noise goes away
If this is brand new, contact the seller and explain the problem, request a return authorization and send it back for replacement. Most sellers will honor a D.O.A. and S.O.A. product.
Swez
ttocs on 02/1/2006 15:25:07
also try switching the speaker outputs and see if the problem moves.
Copyright ClubKnowledge 2009 * All Rights Reserved
