|
Prev :: Next
I recently bought a pioneer amp and 2 aura 50w bass shakers. I am having trouble installing them in my buick riv. Please help!!!!! Replies (3) swez on 01/5/2006 19:15:32 What kind of trouble are you having here? Placement of the shakers, wiring the amp, power to amp??? "Splain more Lucy"? SMILE Swez ph0en1x on 01/5/2006 19:51:48 Im not sure where to place the shakers, i was thinking under the seat. I need to know the easiest way to hook the amp and everything else to make this work. I bought a amp wiring kit but it makes it more confusing. BgDustin4 on 01/5/2006 20:04:02 ive hooked up a few amps nothing like some of the pep here but the basic hook up is the same every time in the power u have a + and a ground and a rem wire the + wire or the big red one u run it from your battery to the amp u need to put the fuse closest to the battery the ground wire u can mount to a suport or the floor of the car be shure to get the paint off the best way is with a self tapping screw the REM wire will be run from your cd player it shuld be labeld on there if it don't have one u can ues your switch wire to the car o ya and u have your RCA wires most of them time if your cd player has RCA outs it will have a Rem wire u can also look to your left of the screen under DIY Articles and hit Read Articles look under there and it will tell a lot more about it hope this helps a lot Dustin Swords Copyright ClubKnowledge 2009 * All Rights Reserved |