Help with Kicker solo X box design

by Kicker007
  Prev :: Next
I have a 1994 Ford Probe and I need help with a high spl enclosure design. I currently have two 12" solo X and they are running on a Kicker kx2500.1. The problem I am having is no one even Kicker can give me good specs for an spl enclosure. You are my last hope. If you can help me I will be forever greatfull. Here is some info on area I have to work with.

Width: 37"
Heighth:15"(can not exceed do to stockclass
Depth:34"

This is the area of my hatch opening, hope it helps.Tks


Replies (5)
P0werLifter on 12/19/2005 14:13:32
any idea around what frequency your cab peaks at? I'm going to say probly around the 50-60hz range. Also, do you want pure spl? or are you using this as a daily driver because this will vary the design. Tuning high will limit your subwoofers functionablility but will give you the highest potential for high SPL numbers since the cabin gain will have an effect.

I'll play around with some designs in my software but Let me know on the questions I listed above.

-PL

P0werLifter on 12/19/2005 15:40:41
Also, please post me the T/S paramaters of the Solo X 12. For some reason its not letting me access the kicker website to get them. Thanks


Ash on 12/19/2005 18:19:06
Here you go homey:

http://www.kicker.com/05/tech-support/manuals/manuals/04SoloX%2010%20and%2012.pdf

P0werLifter on 12/19/2005 19:06:28
Are they 2ohm or 1ohm Voice Coils?

P0werLifter on 12/21/2005 02:55:17
No effort on your part by giving the information I need = No more effort or time spent on my part. Speaking for myself, and for some of the Golds we dont have time to waste on topics that dont give the required information we need to help you out.



Prev :: Next
Copyright ClubKnowledge 2009 * All Rights Reserved

Valid HTML 4.01 Transitional