punch 360x2

by trunkisloud
  Prev :: Next
hey my bro scored one of these for 20 bucks ...its pretty beat up but stilll works fine.....whats the potential of this amp..there are no specs on the amp and i cant seem to pull any online....is it 2ohm stable? how many watts rms...my cousin says about 500 rms maybe...


Replies (3)
asplundher on 11/4/2005 14:29:23
Could it be this one:

http://www.cardomain.com/item/ROCG13602

If so, not a bad amp at all if it has no problems when fully tested. Got enough power to run a high power component set or two 150-200rms subs (will have to be 8 ohms each though). One 300-400rms 4 ohm sub as well. It is 2 ohm stable in stereo; 4 ohm mono only. The wattage rating is 90rms per channel stereo, 350rms mono. That is in "Rockford power", as they usually underrate their amps. So it would be hard to say exactly what the wattage really is, but I don't know about 500.


trunkisloud on 11/4/2005 14:57:47
it looks similar to that but maybe one year newer or older...


swez on 11/4/2005 15:43:16
This may be part of the older Punch A series.. 360a2. Here's a .pdf link for specs and how to use this amp: Silver casing, not the "black toaster" model. (Punch 360.2) Same specs, different casing.

http://www.rockfordfosgate.com/scripts/rightnow.cfg/php.exe/enduser/fattach_get.php?p_sid=dDNW5MTh&p_tbl=9&p_id=340&p_created=1083781892

It is stable at 2 ohms in stereo. If bridged, you need a 4 ohm load min. Page 3 of the .pdf file has the power specs. Not a bad amp here at all!

Swez




Prev :: Next
Copyright ClubKnowledge 2009 * All Rights Reserved

Valid HTML 4.01 Transitional