Ok finally after a few days researching the web and all i think i found a system i can do that will sound good, and I hope i dont need to do ALT/BAT upgrades ok this is what i might get. Profile AP1200- its a 2-channel amp that pumps 600 WRMS when bridge, its a 200 WRMS x 2 by 4 ohms and the amperage is 25A x 3. The subs im getting are MB Quart 12" they can hold a max of 600 WRMS 2 ohms they are DVC (300 WRMS per coil) I found all this of crutchfield.com so if you need more info its there. If this is a good combo plz tell me cuz in a few weeks I'm gonna get started on this my car is a Chevy Aveo 04 stock just for more info. And i really do appreciate all the help I've got I've alrdy saved close to 600 bucks from a past reply thank you SMILE
Replies (1)
swez on 10/24/2005 08:54:56
Shall we delete your older posts?
The amp is not the best brand on the block, but if it can deliver the power you desire at a price you are willing to pay, good nuff.
The subs mentioned... You'll need a pair of the 4+4 DVC's for this amp. You can run a 2 ohm load per channel in stereo or 4 ohms when bridged. Can save $20.00 if you buy them at the outlet store section at Crutch.
These: http://www.crutchfield.com/S-NelQ38ufa71/cgi-bin/ProdView.asp?g=520&I=049DWF304
Crutch is not the cheapest e-tailer on the web. They tend to charge full retail except on sales. However, the support you get from them is best in the business.
Swez
PS This amp is still a bit strong for your electricals. This amp will draw close to 70 amperes of current at full power and your car needs about 45-50 amps to operate essentials properly. You will probably get light dimming issues (at night) when you push this amp hard.
PSS Also, if you don't amp your full range speakers, this system will be VERY bass heavy.
Replies (1)
swez on 10/24/2005 08:54:56
Shall we delete your older posts?
The amp is not the best brand on the block, but if it can deliver the power you desire at a price you are willing to pay, good nuff.
The subs mentioned... You'll need a pair of the 4+4 DVC's for this amp. You can run a 2 ohm load per channel in stereo or 4 ohms when bridged. Can save $20.00 if you buy them at the outlet store section at Crutch.
These: http://www.crutchfield.com/S-NelQ38ufa71/cgi-bin/ProdView.asp?g=520&I=049DWF304
Crutch is not the cheapest e-tailer on the web. They tend to charge full retail except on sales. However, the support you get from them is best in the business.
Swez
PS This amp is still a bit strong for your electricals. This amp will draw close to 70 amperes of current at full power and your car needs about 45-50 amps to operate essentials properly. You will probably get light dimming issues (at night) when you push this amp hard.
PSS Also, if you don't amp your full range speakers, this system will be VERY bass heavy.
Copyright ClubKnowledge 2009 * All Rights Reserved
