Ok if i was paying attention and all like I think i was i think i found a perfect amp for my car(im gonna need advice on this) its the Profile AP 1200 2-channel, it has 200 RMS x 2 at a 4 ohm load, now at 2 ohms its 300 RMS and once i bridge it ill get 600 RMS x 1 and 4 ohms, now if i was reading the details correctly the fuse rating is 25Ax3, and my car can handle 85A so i would need a ALT/BAT upgrade right? the amp cost 169 bucks off of crutchfield is this good or not help plz
Replies (1)
swez on 10/24/2005 09:11:52
We really need to talk... you need some straight up info on choosing a system for your vehicle. Do you have Yahoo IM?
A 20 minute session on live chat should help you understand what is possible and where to get good gear at great prices.
Swez
PS It would be to your benefit to let the techs here at CK, lead you through the process with knowledge and forethought. Right now, this method is like shooting bats with a bee-bee gun, in the dark. (not very effective)
Replies (1)
swez on 10/24/2005 09:11:52
We really need to talk... you need some straight up info on choosing a system for your vehicle. Do you have Yahoo IM?
A 20 minute session on live chat should help you understand what is possible and where to get good gear at great prices.
Swez
PS It would be to your benefit to let the techs here at CK, lead you through the process with knowledge and forethought. Right now, this method is like shooting bats with a bee-bee gun, in the dark. (not very effective)
Copyright ClubKnowledge 2009 * All Rights Reserved
