ok i have 2 rockford fosgate 6x9's that i had in my old dodge and a p3001 rf amp i need to find a place to put the 6x9's
i thought about under the back seats but would u be able to hear them under there i have my sub box sitting in the back seat i was thinking about kicks but 6x9's are kinda big for there they will get kicked any ideas on it ?
Replies (7)
swez on 10/24/2005 09:23:32
You might wish to consider 6x9 boxes and mount them to the "C" pillars. They won't need much power in that location to hear them well. Are they full range (coaxials) or just midbass speakers?
That amp mentioned is a MONO amp. It only has one channel and well suited for subs or midbass only. Pretty strong too... 300 Wrms @ 2 ohms.
Swez
BgDustin4 on 10/26/2005 21:16:17
i must have said the rong amp its a 2 channel the one i have i want to make em look cool lol like some fiberglass stuff but i will mess up on that so the 6x9s are 3 ways
ttocs on 10/27/2005 04:42:52
Have you replaced the factory speakers already? That truck has 6 x 9's in it I thought?
BgDustin4 on 10/27/2005 20:42:43
no it has 6"
ttocs on 10/28/2005 07:59:04
they use to have 6 x 9's in the doors. more then likely you can fit them there if you are willing to cut, but it seems like alot of trouble for them........
swez on 10/28/2005 11:19:29
Crutch says front doors are 6x9 and rear passenger doors are 6.5" rounds. Try em there and see how you like them. Would be good to amp the front speakers and run the rear speakers off the HU amps. Your subs will be pretty strong in back, so you'll need the power up front to balance things out.
Swez
PS Good chatting with you last night on YIM/Skype! SMILE
BgDustin4 on 10/30/2005 21:17:35
thanks swez same to u
i thought about under the back seats but would u be able to hear them under there i have my sub box sitting in the back seat i was thinking about kicks but 6x9's are kinda big for there they will get kicked any ideas on it ?
Replies (7)
swez on 10/24/2005 09:23:32
You might wish to consider 6x9 boxes and mount them to the "C" pillars. They won't need much power in that location to hear them well. Are they full range (coaxials) or just midbass speakers?
That amp mentioned is a MONO amp. It only has one channel and well suited for subs or midbass only. Pretty strong too... 300 Wrms @ 2 ohms.
Swez
BgDustin4 on 10/26/2005 21:16:17
i must have said the rong amp its a 2 channel the one i have i want to make em look cool lol like some fiberglass stuff but i will mess up on that so the 6x9s are 3 ways
ttocs on 10/27/2005 04:42:52
Have you replaced the factory speakers already? That truck has 6 x 9's in it I thought?
BgDustin4 on 10/27/2005 20:42:43
no it has 6"
ttocs on 10/28/2005 07:59:04
they use to have 6 x 9's in the doors. more then likely you can fit them there if you are willing to cut, but it seems like alot of trouble for them........
swez on 10/28/2005 11:19:29
Crutch says front doors are 6x9 and rear passenger doors are 6.5" rounds. Try em there and see how you like them. Would be good to amp the front speakers and run the rear speakers off the HU amps. Your subs will be pretty strong in back, so you'll need the power up front to balance things out.
Swez
PS Good chatting with you last night on YIM/Skype! SMILE
BgDustin4 on 10/30/2005 21:17:35
thanks swez same to u
Copyright ClubKnowledge 2009 * All Rights Reserved
