Im wanting to swap out my 10" JBL sub for a alpine.And in a dual voice coil R serires sub.And after much reading Im pretty much set on the 10" due to both reviews stating the unmatched performance of one of these great subs.Plus Im looking for a sub that sounds great as in a fuller range and somewhat more live like and so far all the specs along in all Ive read sends home the alpine R series and in aluminum or the steel basket.What Im not real clear in is this.One of my main goals is to get a real hard hitting bass! The kind I used to feel way back before any punch and the real bad bass that only came from the first fosgate amps! Now Im not at all impressed with them.Ive found that since those days of no protective circuitry.That most amps are all of the same bassic types.That is as long as you watch the specs period then its just more of what is good for you?So since those banging through your seats back and into yours! Its been a rather boomy sick kinda thing.Not bad sounds overal but just not that hard driving seprate speaker and almost like any of your three piece bands of big sounds.You had the same with only tweeters ,mids,and woofers as thats all we knew them as?Now days Im told those were still subs? Im not so sure about that at least as not at all like most of what I hear today! And thats my main b****h! However Im pretty certain the alpines my answer and in a sealed enclosure along with some good fill etc.And the proper RMS rating to sub needs.So heres my lacking of knowledge in only this area.Which of the two subs do you know to be the hardest hitter! The 2 ohm or 4 ohm? Im aware the 2 ohm has less resistance there fore should play louder.But not nessesarly harder? Plus I only have room for one sub and it really wont matter if its a 10 or 12 inch.However Im also wanting a blend of sorts and why I choose the 5.2 kappas and the 6.5 vegas.I must say Im much more impressed with the cerwins any day of the week over the infinitys.But then you have to cut them alittle slack since there a wee bit smaller.As well they do play very clean.And so my thoughts are to stick with one 10 inch but get the bad boy of the crowd! And the SWR-1021D or 1041D will be my choices.AS for the amp? Any suggestions? Obviously Im wanting like most all you can get for as cheap as possable.Hey thats not to much to ask,is it.And if anyone has any knowledge of where these are on sale at that would be most helpful and appreciated as well.As to date all my car audio needs had been filled at car stereo online! There prices are hard to beat as well the great selection.But since hooked on tronics has taken over in this sub deal only and even amps! Now if anyone has any advise over and beyond the 4 to 2 ohm war as in a particular way and or material used in the subs enclosure? Im all ears! As Im going to try out a scary project.As my pressent enclosure looks and sounds great.But it weighs half as much as my toyota truck and that an older built 4wheeler extracab no less! So since its been under major construction four years straight and still going.Weight is where its not at! So aluminum enlcosures are what Im about to set forth upon.Only Ive got a solid plan that should sound great.Plus match the rest of the interior alot better and with alittle room to spare! Thanks much
Replies (0)
Replies (0)
Copyright ClubKnowledge 2009 * All Rights Reserved
