Im looking at geting a screen for my car then running a ps2 into it, but the screen has no rca output or remote cable so the plan is to use output of ps2 as the rcas but what do i use as the remote cable to turn on the amps is it just standard 12volt??
Replies (1)
UKinstaller on 07/20/2005 11:05:38
the screen needs an input, not an output, to get a PS2 on it. the PS2 is putting OUT info, so you run it IN to the screen, that's how i remember it.
as far as the remote wire, you can use the ignition wire that connects to the head unit. it should be red off of the radio. it's the same thing as using a remote wire except the amps stay on if you turn off the head unit when driving. they'll turn off with the car, though.
-UK
Replies (1)
UKinstaller on 07/20/2005 11:05:38
the screen needs an input, not an output, to get a PS2 on it. the PS2 is putting OUT info, so you run it IN to the screen, that's how i remember it.
as far as the remote wire, you can use the ignition wire that connects to the head unit. it should be red off of the radio. it's the same thing as using a remote wire except the amps stay on if you turn off the head unit when driving. they'll turn off with the car, though.
-UK
Copyright ClubKnowledge 2009 * All Rights Reserved
