hi, how do i install a used kenwood KDC-2011S into my 78 Ford Granada...theres only for wires..there 2 for the speakers and 1 for the ligh that lights up soy ou can see when its dark...and I think he other one is for power.....theres so many wires on my Kenwood cdplayer and I dont know which ones to put to together so I can connect them with the wires in my car..can you help me?? if you people can email me at take_you_away83@hotmail.com thanks or leave a reply.
Replies (3)
mattgleb on 06/12/2005 14:30:33
people help me!!
ttocs on 06/12/2005 20:27:44
you will need to run some wires, probably to the fuse box. You will need a +12v switched, and it would not be a bad idea to run a new ground to a fresh point of the chassis.
swez on 06/12/2005 20:31:09
Hummmm, this is an older model CD player. (circa 1998?) No specs or details off Kenwood site at the moment. May I suggest that you contact Kenwood Tech Service and get the install manual for this model?
Here's a contact link:
http://www.kenwoodusa.com/email/feedback.aspx?emailsubject=generalquestions
Swez
Replies (3)
mattgleb on 06/12/2005 14:30:33
people help me!!
ttocs on 06/12/2005 20:27:44
you will need to run some wires, probably to the fuse box. You will need a +12v switched, and it would not be a bad idea to run a new ground to a fresh point of the chassis.
swez on 06/12/2005 20:31:09
Hummmm, this is an older model CD player. (circa 1998?) No specs or details off Kenwood site at the moment. May I suggest that you contact Kenwood Tech Service and get the install manual for this model?
Here's a contact link:
http://www.kenwoodusa.com/email/feedback.aspx?emailsubject=generalquestions
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
