I currently have one amp setup in my truck and was wanting to add a second. Both amps have RCA hooups to link them together. My question is this: Can I use all the original wires ( power, turn on, and ground) from the first amp with the second or do I have to run separate additional wires for each hookup for the second. I would really like to just link the second amp to the first using the RCA cables without having to run any additional wiring. Thanks
Replies (2)
ryanben on 07/15/2003 23:50:50
2001 F-250
Swez on 07/16/2003 06:51:23
This is possible to do as you suggest if... you have a large enough power feed wire (gage) to handle the current demand for both amps.
1. What amps do you have now? Maker and model number
2. Add up the fuses and indicate the max current draw for both amps
3. What gage wire are you using for the power feed now?
Swez
Replies (2)
ryanben on 07/15/2003 23:50:50
2001 F-250
Swez on 07/16/2003 06:51:23
This is possible to do as you suggest if... you have a large enough power feed wire (gage) to handle the current demand for both amps.
1. What amps do you have now? Maker and model number
2. Add up the fuses and indicate the max current draw for both amps
3. What gage wire are you using for the power feed now?
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
