A friend gave me his alpine 3555 amp with out the manual, need to make sure I have the switches set correctly, I want to run it in the 2 ch. bridged mode, the 1/2 ch has a switch that says L(mono),stereo,ch 1/2, I have this one set to L(mono), same for the 3/4 ch, than there is another switch on the 3/4 side that says input selector, this one has 3 settings ch1/2,ch3/4, or ch 1&2/3&4, does this one get set to the 1&2/3&4 setting?? Also on the RCA connectors the left rca says L(mono) so I plug the cables into the L rca for each pair of channels correct?
Thanks
Replies (1)
swez on 03/28/2005 09:18:12
Best to request the owners manual you have to go into the main site, click on Tech center Tab, then click on Consumer site button and then owners manual. Need to have the complete product number to get a good search.
http://www.alpine-usa.com
Swez
Thanks
Replies (1)
swez on 03/28/2005 09:18:12
Best to request the owners manual you have to go into the main site, click on Tech center Tab, then click on Consumer site button and then owners manual. Need to have the complete product number to get a good search.
http://www.alpine-usa.com
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
