What is it? I've got 5 of them. Can I use them? Do I need them?
Replies (2)
Victor on 03/25/2005 01:28:31
Its a filter used to stabilize speaker impedance at a crossover frequency where impedance has risen to twice the nominal impedance.
It can also be used to attenuate speaker output levels without changing impedance loads to an amplifier.
swez on 03/25/2005 08:55:50
Can be used to attenuate a speakers output by several dB, depending on the impedance of the speaker and the values of the resistors used in the Zobel network. One of these can be useful if you have a very loud left/front channel (proximity effect) and only want to drop that speaker a few dB w/o messing with balance or fade controls.
Swez
Replies (2)
Victor on 03/25/2005 01:28:31
Its a filter used to stabilize speaker impedance at a crossover frequency where impedance has risen to twice the nominal impedance.
It can also be used to attenuate speaker output levels without changing impedance loads to an amplifier.
swez on 03/25/2005 08:55:50
Can be used to attenuate a speakers output by several dB, depending on the impedance of the speaker and the values of the resistors used in the Zobel network. One of these can be useful if you have a very loud left/front channel (proximity effect) and only want to drop that speaker a few dB w/o messing with balance or fade controls.
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
