|
Prev :: Next
1997 S10 Ext cab PU Equip I currently have installed Alpine 7893 HU Infinity 4x6 plates in dash MBquart DSD216 seperates in doors Alpine bandpass 10" sub rockford fasgate 180 powering sub Equipment I own and am ready to install AlpineMRV-F340 amp Alpine SPX 177A 6.5 seperates QLogic kickpanel enclosures Now my questions Possible setups I am considering. 1 Leave MBqarts where they are. Install Alpine SPX 177A in the Qlogic enclosures. Power the four 6.5 with the Alpine 340 and power the 4x6 with the HU amp. 2 remove the MBqarts and install Alpine 177A in their place. Leave 4x6 in dash and power all four with the Alpine 340. My question is which setup would work best in my truck. I have read that all you need is two good 6.5 speakers and possibly a fill in set (4x6 in dash) to have quality sound. I am open to all suggestions Thanks SMILE Replies (1) Tray on 07/8/2003 12:03:36 If it were me, I'd move the MBs to the kickpanels, and put the alpines in the doors, then try the amp hooked up to all the different combos to see which setup sounded best to my ears. Just a guess, but I would imagine the dash plates would be the weakest point, so I'd leave them out, and power the others with the Alpine 340. Copyright ClubKnowledge 2009 * All Rights Reserved |