ok the amp im ordering off ebay right now says its a one channel mono amp and i go to car domain to look at its specs and it has two channels on it...now im kinda thinkin well..maybe its just a different pic but then i see something that sayd 2 or 4 channels for non fading bass.. what does that mean??
heres the site to look at what i looked at
http://www.cardomain.com/item/JBLBP6001
Replies (8)
Faded on 03/2/2005 23:35:42
so am i getting at two channel amp or a one channel amp??
Victor on 03/3/2005 02:13:30
that is a 1ch amp but it has dual speaker connectors on it.
uochronos on 03/3/2005 05:16:39
ya its a 1 channel like victor says it just has 2 sets of spekaer outputs so its easier to wire 2 speakers to them.
Chronos
Faded on 03/3/2005 23:00:50
so if im wiring my 10's parallel to 1ohm would i bridge it between the two speaker connectors? or just to one of them?? lol sorry for dumb questions but im confused ive never had a one channel amp before ive always had 4channel
thankS
-Faded-
uochronos on 03/4/2005 02:21:53
if parralel is what you want then run one sub to one connection and the other sub to the other connection. and you got parelel.
Chronos
montego_27 on 03/4/2005 05:22:38
Does this help?
http://www.crutchfieldadvisor.com/S-IUruXmLlKHJ/learningcenter/car/subwoofers_wiring.html
swez on 03/4/2005 08:12:01
Faded,
What subs are you planning to use with that JBL 600.1 amp? This amp is 1-2 ohms stable and very potent too. It does NOT have a Subsonic filter however. If you plan to use a ported enclosure, need to get an inline SSF network, to protect your subs. Sealed, no need for a SSF network.
Swez
montego_27 on 03/4/2005 11:51:57
11: 50 AM 1 hr. left on the auction,are you still going after that amp?
heres the site to look at what i looked at
http://www.cardomain.com/item/JBLBP6001
Replies (8)
Faded on 03/2/2005 23:35:42
so am i getting at two channel amp or a one channel amp??
Victor on 03/3/2005 02:13:30
that is a 1ch amp but it has dual speaker connectors on it.
uochronos on 03/3/2005 05:16:39
ya its a 1 channel like victor says it just has 2 sets of spekaer outputs so its easier to wire 2 speakers to them.
Chronos
Faded on 03/3/2005 23:00:50
so if im wiring my 10's parallel to 1ohm would i bridge it between the two speaker connectors? or just to one of them?? lol sorry for dumb questions but im confused ive never had a one channel amp before ive always had 4channel
thankS
-Faded-
uochronos on 03/4/2005 02:21:53
if parralel is what you want then run one sub to one connection and the other sub to the other connection. and you got parelel.
Chronos
montego_27 on 03/4/2005 05:22:38
Does this help?
http://www.crutchfieldadvisor.com/S-IUruXmLlKHJ/learningcenter/car/subwoofers_wiring.html
swez on 03/4/2005 08:12:01
Faded,
What subs are you planning to use with that JBL 600.1 amp? This amp is 1-2 ohms stable and very potent too. It does NOT have a Subsonic filter however. If you plan to use a ported enclosure, need to get an inline SSF network, to protect your subs. Sealed, no need for a SSF network.
Swez
montego_27 on 03/4/2005 11:51:57
11: 50 AM 1 hr. left on the auction,are you still going after that amp?
Copyright ClubKnowledge 2009 * All Rights Reserved
