92' Chevy Lumina
First my gear,
Pioneer HU
Bahn AT68 25mm Silk dome tweeters(in the A pillars)
CDT HD-4's 4" midranges (in the dash)
Polk db 690 6x9's (rear fill)
2 10" Alpine SWR 1021 DVC (in sealed enclosure)
Alpine MRD_301 class d monobloc 350x1 (running subs)
Coustic Power Logic 420x 80x4@14.4 (running CDT's + Polks)
(old school Coustic but check out the specs and features on this amp) http://www.coustic.com/classic/PDFs/AMP-420x.PDF
Bahn AEQ 6Q 8v Line Driver/5 band EQ
Tweets are running right off the head unit
Ok, with that said, as you can probably see by my gear I'm more of an SQ kinda guy.I'm limited w/ what I can do up front
(can't do anything in doors or kicks)so I'm restricted to the 4" CDT's (they rock)in the dash. What I'm thinking of doing is building an enclosure that will sit right on the floor on the raised (1 1/2") "hump" right between the driver and passenger.The space I have is 20"D X 9"W X 10"H. I am thinking something mid-bass to complete my front stage.I also plan to drop that Bahn Line driver/EQ right down into the enclosure as well on a 30 degree angle facing up.I can fabricate an angle spacer for speakers on sides of enclosure for better imaging so they will point up towards driver on one side and passenger on the other.Will plan on covering w/ same burgandy cut pile carpeting as in the car(maybe integrate a couple of cup holders into it as well).If you check that amp link it may give you some ideas on wiring possibilities. Any suggestions as far as enclosure?,speakers?,wiring? maybe adding a third small mono amp?or anything else.I know this post is long ,but better to give more info than not enough. Thanks, my hands are pretty tired now. Tego
Replies (1)
uochronos on 02/22/2005 00:16:08
for adding mid range/mid bass to the front Adire makes soem killer 6 and 8" midbass speakers for very reasonable... as does CDT.
very nice set up so far you have going
Chronos
First my gear,
Pioneer HU
Bahn AT68 25mm Silk dome tweeters(in the A pillars)
CDT HD-4's 4" midranges (in the dash)
Polk db 690 6x9's (rear fill)
2 10" Alpine SWR 1021 DVC (in sealed enclosure)
Alpine MRD_301 class d monobloc 350x1 (running subs)
Coustic Power Logic 420x 80x4@14.4 (running CDT's + Polks)
(old school Coustic but check out the specs and features on this amp) http://www.coustic.com/classic/PDFs/AMP-420x.PDF
Bahn AEQ 6Q 8v Line Driver/5 band EQ
Tweets are running right off the head unit
Ok, with that said, as you can probably see by my gear I'm more of an SQ kinda guy.I'm limited w/ what I can do up front
(can't do anything in doors or kicks)so I'm restricted to the 4" CDT's (they rock)in the dash. What I'm thinking of doing is building an enclosure that will sit right on the floor on the raised (1 1/2") "hump" right between the driver and passenger.The space I have is 20"D X 9"W X 10"H. I am thinking something mid-bass to complete my front stage.I also plan to drop that Bahn Line driver/EQ right down into the enclosure as well on a 30 degree angle facing up.I can fabricate an angle spacer for speakers on sides of enclosure for better imaging so they will point up towards driver on one side and passenger on the other.Will plan on covering w/ same burgandy cut pile carpeting as in the car(maybe integrate a couple of cup holders into it as well).If you check that amp link it may give you some ideas on wiring possibilities. Any suggestions as far as enclosure?,speakers?,wiring? maybe adding a third small mono amp?or anything else.I know this post is long ,but better to give more info than not enough. Thanks, my hands are pretty tired now. Tego
Replies (1)
uochronos on 02/22/2005 00:16:08
for adding mid range/mid bass to the front Adire makes soem killer 6 and 8" midbass speakers for very reasonable... as does CDT.
very nice set up so far you have going
Chronos
Copyright ClubKnowledge 2009 * All Rights Reserved
