Hey guys ive got a quick question. I purchased a set of 70Hz F-mods i was going to hook up to the RCA jack on the MRV-F450 amplifier i have so i can set up the 8" Koda to play 70-180Hz and have the mids filter out everything below 180.
My problem is that the Fmods are to long to put on the amplifier because of the way its setup it has a cover that goes over all the wiring. Soooo....i was wondering if its possible to just plug in the Fmods into the RCA jack in the HU that runs to this amplifier.
I dont really see a problem with it but i just wanted to double check.
Thanks Guys CLAP
Replies (1)
swez on 12/29/2004 19:31:19
You can do that or just get a some short RCA patch cords that allow you to install them out of the way, but easy to access. The main thing is that they are in the signal path, between the signal source and your amp. How that is accomplished, is pretty much up to your discretion.
Swez
My problem is that the Fmods are to long to put on the amplifier because of the way its setup it has a cover that goes over all the wiring. Soooo....i was wondering if its possible to just plug in the Fmods into the RCA jack in the HU that runs to this amplifier.
I dont really see a problem with it but i just wanted to double check.
Thanks Guys CLAP
Replies (1)
swez on 12/29/2004 19:31:19
You can do that or just get a some short RCA patch cords that allow you to install them out of the way, but easy to access. The main thing is that they are in the signal path, between the signal source and your amp. How that is accomplished, is pretty much up to your discretion.
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
