|
Prev :: Next
How would I go about hooking up this EQ? I have 2 sets of RCA's coming from my head unit and from the EQ it's going to a four channel amp and a sub amp.The EQ has only inputs for left and right on the main. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=79841&item=5730529724&tc=photo Thanx, Tego Replies (4) Victor on 12/27/2004 10:19:07 ok.. there will be 5 sets of RCA plugs at the back of the EQ.. 1 - subwoofer output 2 - DVD 3 - MAIN 4/5 - Output Front + Rear. right...?? now run a RCA cord from either the front or the rear RCA output of the HU to the MAIN ( input ) jacks.. then wire the amp for the front and the rear amp/amps to the number 5 ( output Front + Rear ) wire the sub amp tho the Sub output on the EQ.. thts it.. the EQ is already to get tweaked.. hope that helps.. Victor. swez on 12/27/2004 11:15:57 Agreed... this is a very versatile product... EQ, Line Driver and crossover features. (plus a selectable input... HU or DVD) Not bad at all for that price. Swez montego_27 on 12/27/2004 15:37:04 Thanks for the input Victor and Swez! And Swez this should take care of my low HU volt output problem(2.2) and now I won't have to daisy chain the sub amp off the 4-channel. I'll also be able to adjust my lows better w/ the sub output on this unit. I've always been into my car sound but w/ this site I've become much more technically knowlegeable and have taken everything to a whole new level Thanks again, Tego swez on 12/27/2004 22:29:25 Great! When you get it installed, let us know how it works out OK? Swez Copyright ClubKnowledge 2009 * All Rights Reserved |