I have a 92 Honda Civic and I want to install the Clarion System from my old VW. I am only having two problems and both are related to the wiring. Number 1 i am not sure how to get the wire from the battery to the inside of the car. My VW had a hole in the fire wall that I ran everything through but i cant find anything like that on this car. I would like to avoid making a hole in the FW myself if I could (wouldn't have the first clue how to anyways). Second I dont know the best way to run the wires in the car.

Can Anyone Help,
Thanks

---

Replies (1)

---

Kickerman89 on 03/22/2003 19:40:38
there should be some rubber boots in the wall if u cant find one youll probably end up making one (hole). depending on the ga. of the wire as size of hole yadda yadda. once u get it through if u do, run the power wire and the remote wire on one side of the vehicle and the rca's on the other side. thus avoiding annoying noise. Grounding is KEY. ground 12" away from amp and make sure its bare metal no painted surfaces. that should do it man good luck Kickerman

---