Hello, new to this board. I have a "95 Accord EX and want to put new speakers in place of the factory ones. I already have the speakers and just need to know some wiring. I removed the factory spkrs and they just use a plug. How do I hook up my after market spkrs?
Replies (2)
ZeAliOuS on 12/20/2004 21:45:19
Circuit city does installs pretty cheap. If ur super clueless it might be a good idea to have some one else do the install.
U say plug... is it a huge bulky plug? how many wires go into the plug?
UKinstaller on 12/21/2004 00:38:14
you can either tap into the existing wires or buy speaker harnesses to fit the plugs that connect to the factory speakers.
if you decide to tap into the existing wires, just strip back some of the wire from each wire and connect speaker wire from the stripped back part to the new speaker. make sure you cover any open wire withe electrical tape!! stick you some speaker terminals on the ends of the new wires, attach to the new speakes, and mount the new speakers. that's it.
for hondas where i don't use speaker harnesses, i make the side of the harness with the plug on it that released it from the factory speaker negative. do this to all four speakers or it won't sound right. enjoy!!
-UK
Replies (2)
ZeAliOuS on 12/20/2004 21:45:19
Circuit city does installs pretty cheap. If ur super clueless it might be a good idea to have some one else do the install.
U say plug... is it a huge bulky plug? how many wires go into the plug?
UKinstaller on 12/21/2004 00:38:14
you can either tap into the existing wires or buy speaker harnesses to fit the plugs that connect to the factory speakers.
if you decide to tap into the existing wires, just strip back some of the wire from each wire and connect speaker wire from the stripped back part to the new speaker. make sure you cover any open wire withe electrical tape!! stick you some speaker terminals on the ends of the new wires, attach to the new speakes, and mount the new speakers. that's it.
for hondas where i don't use speaker harnesses, i make the side of the harness with the plug on it that released it from the factory speaker negative. do this to all four speakers or it won't sound right. enjoy!!
-UK
Copyright ClubKnowledge 2009 * All Rights Reserved
