I bought a bazzoka sub with a 5 chnannel amp built in, what is the easiest way to hook it up, I just want to run the back-speaker thru the amp and run the sub.
thanks
Replies (2)
swez on 11/27/2004 13:49:51
This one? Bazooka Concert Series CS8A5
http://www.crutchfield.com/S-JywmrykMXFi/cgi-bin/ProdView.asp?g=51000&I=204CS8A5&search=bazooka&wmsf=1
This system has speaker level inputs that you can tap off the rear speaker lines to feed the amp input section. It also has 25 x 4 full range speaker outputs and a 100 watt sub amp to drive the internal sub.
This system has a 100 Hz (HP/LP) filter network, a subsonic filter and phase reversal switch. It looks like we have ~200 watts RMS output in all. So a #10 or #8 gage power and ground can be used.
For details on installing the amp, review the owner/install manual for details. A brief install blurb can be found here:
http://www.crutchfield.com/S-JywmrykMXFi/cgi-bin/ProdView.asp?g=51000&id=detailed_info&i=204CS8A5
How many rear speakers do you have in this vehicle now? I am not sure if the 4 channel amps can be bridged to a more potent 2 channel version on this combo. The install manual should have that detail for you.
Hummm, it really does not have much detail in the install manual:
http://www.bazooka.com./pdf/current/CS8A5.pdf
If you have more questions on what can and cannot be done with this model, contact Bazooka Technical for best info on this product.
http://www.bazooka.com./contactUs.asp
Swez
texasxb on 11/27/2004 15:29:29
Thanks, great
thanks
Replies (2)
swez on 11/27/2004 13:49:51
This one? Bazooka Concert Series CS8A5
http://www.crutchfield.com/S-JywmrykMXFi/cgi-bin/ProdView.asp?g=51000&I=204CS8A5&search=bazooka&wmsf=1
This system has speaker level inputs that you can tap off the rear speaker lines to feed the amp input section. It also has 25 x 4 full range speaker outputs and a 100 watt sub amp to drive the internal sub.
This system has a 100 Hz (HP/LP) filter network, a subsonic filter and phase reversal switch. It looks like we have ~200 watts RMS output in all. So a #10 or #8 gage power and ground can be used.
For details on installing the amp, review the owner/install manual for details. A brief install blurb can be found here:
http://www.crutchfield.com/S-JywmrykMXFi/cgi-bin/ProdView.asp?g=51000&id=detailed_info&i=204CS8A5
How many rear speakers do you have in this vehicle now? I am not sure if the 4 channel amps can be bridged to a more potent 2 channel version on this combo. The install manual should have that detail for you.
Hummm, it really does not have much detail in the install manual:
http://www.bazooka.com./pdf/current/CS8A5.pdf
If you have more questions on what can and cannot be done with this model, contact Bazooka Technical for best info on this product.
http://www.bazooka.com./contactUs.asp
Swez
texasxb on 11/27/2004 15:29:29
Thanks, great
Copyright ClubKnowledge 2009 * All Rights Reserved
