i need to know the best way of running a power cable from my battery into my car so i can run my amp! i know where im going to run the cord when i get it in my car. i have 6 meters to play with (over kill i think but it came in an amp pack) i have a 1994 vr commodore and i need help! any help, thanx!
Replies (1)
uochronos on 11/25/2004 09:09:30
I dont know that specific vehicle... however many vehicles have a empty hole along the fire wall that you can knock the plug out of and run the wire threw. or on that doesnt ave much running threw it.
if that is not the case though you well need to drill a hole out. this is what i ahd to do on my truck. if you do this you well need to buy your own rubber gromet for the whole. having the wire rub against metal edges is a no no. well cut into it and short out.
Chronos
PS
if you drill find a point on bot sides you can identify i found the clutch cable then went left 4 inches and down some and found a spot on both inside the car adn in the engine compartment where nothing was and then drilled. be very carefull not to drill into anything.
Replies (1)
uochronos on 11/25/2004 09:09:30
I dont know that specific vehicle... however many vehicles have a empty hole along the fire wall that you can knock the plug out of and run the wire threw. or on that doesnt ave much running threw it.
if that is not the case though you well need to drill a hole out. this is what i ahd to do on my truck. if you do this you well need to buy your own rubber gromet for the whole. having the wire rub against metal edges is a no no. well cut into it and short out.
Chronos
PS
if you drill find a point on bot sides you can identify i found the clutch cable then went left 4 inches and down some and found a spot on both inside the car adn in the engine compartment where nothing was and then drilled. be very carefull not to drill into anything.
Copyright ClubKnowledge 2009 * All Rights Reserved
