http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=260-317
Is this a decent price for one pound of polyfill?
How well will this stuff work?
I'm putting it in a dual bandpass enclosure.
It's made of 3/4" MDF....is it in need of polyfill, or should i put some in there for the heck of it?
Is one pound enough for the given box?
Box specs
Box measures 30" wide x 15" deep x 15" tall
3/8" Plexiglass window with 4 chrome ports
Divided chambers with 1.13 cu ft each
Replies (3)
swez on 11/11/2004 19:59:25
You can buy the same basic material at WalMart (fabric section) for like $2.00 a lb.
In this chamber size 12-16 oz per chamber (sealed side) is fine. Just shoot a few staples in the fiber fill to keep it in place.
Swez
danielm87 on 11/11/2004 20:03:53
Wahoo! I've got a Wal-Mart right down the road, THANKS.
12-16 oz per chamber would put me to buy 2 pounds, so i guess i'll have a little left over incase i need any later.
Thanks a bunch Swez, if you were a chick i'd love you.
Until then, thanks for the help buddy! CLAP
swez on 11/11/2004 20:12:46
Care to chat for a bit bud? I'll be there...
Swez GRIN
Is this a decent price for one pound of polyfill?
How well will this stuff work?
I'm putting it in a dual bandpass enclosure.
It's made of 3/4" MDF....is it in need of polyfill, or should i put some in there for the heck of it?
Is one pound enough for the given box?
Box specs
Box measures 30" wide x 15" deep x 15" tall
3/8" Plexiglass window with 4 chrome ports
Divided chambers with 1.13 cu ft each
Replies (3)
swez on 11/11/2004 19:59:25
You can buy the same basic material at WalMart (fabric section) for like $2.00 a lb.
In this chamber size 12-16 oz per chamber (sealed side) is fine. Just shoot a few staples in the fiber fill to keep it in place.
Swez
danielm87 on 11/11/2004 20:03:53
Wahoo! I've got a Wal-Mart right down the road, THANKS.
12-16 oz per chamber would put me to buy 2 pounds, so i guess i'll have a little left over incase i need any later.
Thanks a bunch Swez, if you were a chick i'd love you.
Until then, thanks for the help buddy! CLAP
swez on 11/11/2004 20:12:46
Care to chat for a bit bud? I'll be there...
Swez GRIN
Copyright ClubKnowledge 2009 * All Rights Reserved
