Need help in figuring out the fuse rating (for power cable) for P8804 amp. 4x100WRMS @4 ohms
Replies (2)
swez on 11/11/2004 09:52:03
Best to go with a min of #2-1/0 gage here. That way, if you add a sub amp later, you have room to expand without changing wires.
This RF amp is pretty potent stuff! 400 RMS x 2 when bridged. No fuse specs on the amp or max current draw either. The general info I did get... this amp can take 1/0 input wire. That tells us this amp is definitely a big current draw. My best guess is about 80-90A of max current draw here. (A/B class amplifier)
Swez
etsanch on 11/14/2004 21:04:21
Thanks Swez!
Replies (2)
swez on 11/11/2004 09:52:03
Best to go with a min of #2-1/0 gage here. That way, if you add a sub amp later, you have room to expand without changing wires.
This RF amp is pretty potent stuff! 400 RMS x 2 when bridged. No fuse specs on the amp or max current draw either. The general info I did get... this amp can take 1/0 input wire. That tells us this amp is definitely a big current draw. My best guess is about 80-90A of max current draw here. (A/B class amplifier)
Swez
etsanch on 11/14/2004 21:04:21
Thanks Swez!
Copyright ClubKnowledge 2009 * All Rights Reserved
