What wiring kit should I use?

by cheech226
  Prev :: Next
I'm soon to get a JBL 600.1Z to push 2 JL 12" W3V2's. So I don't know what guage wire and what the fuse should be in it. And I believe that this is the right amp that a few of the guys in here told me about. Check it out for me and tell me if its right.
http://www.cardomain.com/item/JBLBP6001Z?ref=bizrdf

Thanks in Advance.

Brett


Replies (5)
cheech226 on 11/4/2004 16:28:50
Is this the same amp?

http://www.outerlimitsaudio.com/product.cfm?ProductID=2382


Brett

ttocs on 11/4/2004 22:14:57
get a 4 awg kit and you will be fine now, and in the future if you upgrade.


swez on 11/6/2004 22:11:59
Ditto! Plan ahead as this amp mentioned draws ~57A at full power. A #4 gage wire will take 80-100A's of current. So, you can add a 2nd amp later if you like.

Swez

alanjlamore on 11/6/2004 22:21:50
I'm going to be getting the JBL BP600.1z also.

Did you find it on cardomain's website? That's the cheapest I've seen it anywhere and I've been looking for a long time.

Hope that helps.


2fastxd on 11/6/2004 22:30:50
I wanted to get it also to push 2 alpine type rs. I currently have a jbl bp 300.1 and its awsome, good sound quality and it doesnt heat up alot



Prev :: Next
Copyright ClubKnowledge 2009 * All Rights Reserved

Valid HTML 4.01 Transitional