What exactly is signal to noise ratio?

by montego_27
  Prev :: Next
I see this spec on amps and don't know if higher or lower is better. Some Alpines are at 80dba and I see some RF's at 103,( both reputable amps ) whats up ?


Replies (5)
swez on 09/6/2004 08:13:53
S/N ratio is a specification that tells how much noise rejection an amp circuit offers VS passing amplified signals. I read a good article a while back and it stated that anything over 80 is a very usable number. It also stated that the higher the number, does not reflect quality of the amplified sound or noise rejection.

Here's a link to some good reading on the subject:

http://www.bcae1.com/sig2nois.htm

Swez

ttocs on 09/7/2004 22:58:29
ttt


swez on 09/8/2004 09:33:44
Bump ^

Daniel on 09/8/2004 15:02:21
Wow, that's a great link there. I probably spent 2 hours on it already. Thanks Swez.

swez on 09/9/2004 09:55:48
Yes, this (bce1) is a very good site. One can spend days reading each link. Some are very simple and easy to understand. Other topics can be very complex and require a few years of electronics background to get the full idea of what is being put forth.

http://www.bcae1.com

Happy reading,
Swez



Prev :: Next
Copyright ClubKnowledge 2009 * All Rights Reserved

Valid HTML 4.01 Transitional