I have a problem I just got a 1600w 160 rms 4 channel it takes 2 ohms , 4 ohms or 8 ohms my speaker are 2 700w 4ohm. When playing anything on the stereo the speaker cuts in and out what is the problem the speaker are the right ohms ???????????????
Replies (3)
uochronos on 08/30/2004 02:06:55
sound likely to be a bad ground. i would check all grounds thourghly.
swez on 08/30/2004 08:42:27
Could be a bad ground or amp is going into protect mode. Say more about amp & speaker make and model #'s.
Also, If this amp is really 1600 watts, it can pull a huge amount of current from your electrical system. Assume this amp is connected to a #4 gage power cable. Make sure every electrical connection is tight, grounded to bare metal in car etc.
What are the gain settings you are using on this amp now and the HU make/model #'s that powers the amp?
Swez
ttocs on 08/30/2004 11:23:41
what kind of amp, how is it wired?
Replies (3)
uochronos on 08/30/2004 02:06:55
sound likely to be a bad ground. i would check all grounds thourghly.
swez on 08/30/2004 08:42:27
Could be a bad ground or amp is going into protect mode. Say more about amp & speaker make and model #'s.
Also, If this amp is really 1600 watts, it can pull a huge amount of current from your electrical system. Assume this amp is connected to a #4 gage power cable. Make sure every electrical connection is tight, grounded to bare metal in car etc.
What are the gain settings you are using on this amp now and the HU make/model #'s that powers the amp?
Swez
ttocs on 08/30/2004 11:23:41
what kind of amp, how is it wired?
Copyright ClubKnowledge 2009 * All Rights Reserved
