|
Prev :: Next
sony bridgeable amp with two ten inch subs. do i connect the positive to one sub and the negative to the other sub and run a wire from the positive from one sub to the negative of the other sub? Replies (5) uochronos on 08/5/2004 05:45:26 ok to tell you how to do this correctly we need alot more info here. first off what mdoel sony amp that is really important. and what brand and moedel of subs. without this info we cant tell you how to wire them properly. swez on 08/5/2004 07:15:47 What model amp is this? Also, these subs, what are the ohm ratings on them and how many voice coils do they have each. (1 or 2 coils/sub?) Swez montego_27 on 08/5/2004 09:55:52 amp is a sony280 gtx 200w nom. 480 peak. subs are sony 10 inch 150 nom. 650 peak single voice coils . Thanx, P0werLifter on 08/5/2004 15:01:53 Do you know the Ohmage of the subs? SVC 2,4,6ohm etc? swez on 08/6/2004 10:03:57 Sony only makes 4 ohm subs for the most part. Don't think they even make a DVC yet. (stoneage technology) Best way to wire this system is to wire 1 sub to each channel and run amp in stereo mode. DO NOT BRIDGE THIS AMP WITH THESE SUBS !!! Swez PS sony280 gtx : An Xplode series 2 channel amp, 80 watts RMS x 2 @ 4 ohms. Copyright ClubKnowledge 2009 * All Rights Reserved |