Someone on the board asked for specs and enclosure recommendations on the CV D1002 subs. Cannot recall who had them, but here are the specs and box recommendations per Scott Mech @ Zeb.com.
Cerwin Vega HED-D1002
• V-Flex Long Throw Suspension
• Titanium Plated Co-Polymer Cone
• High Energy Strontium Ferrite Magnet
• High Temperature Voice Coil
Specifications
Nominal Impedence (ohms) 4 ohms/Coil
Voice Coil Diameter - inch (mm) 1 1/2"
Voice Coil Quantity 2 @ 4 0hms/ea. coil
Fs (Hz) 25 Hz
Qts 0.671
Qms 13.27
Qes 0.74
Vas- cu.ft (liter) 2.87 cu. ft. (81.4 liters)
Xmax- inch (mm) +/- 0.47" (12 mm)
Sensitivity
88 db
Re 3.9 ohms /coil
Power Handling (RMS) 200 watts
Power Handling (Peak) 500 watts
Mounting Diameter - inch (mm) 9" (288mm)
Mounting Depth - inch (mm) 5 5/8" (143mm)
Speaker Displacement - inch (mm) 0.059 cu. ft. (1.7 liters)
Sealed Box Volume - cu. ft. (liter) 0.7 cu. ft.(19.8 liters)
Vented Box Volume - N/R
Port Diameter - N/R
Port Length - N/R
Warranty - Parts One Year
Warranty - Labor One Year
Swez
Replies (0)
Cerwin Vega HED-D1002
• V-Flex Long Throw Suspension
• Titanium Plated Co-Polymer Cone
• High Energy Strontium Ferrite Magnet
• High Temperature Voice Coil
Specifications
Nominal Impedence (ohms) 4 ohms/Coil
Voice Coil Diameter - inch (mm) 1 1/2"
Voice Coil Quantity 2 @ 4 0hms/ea. coil
Fs (Hz) 25 Hz
Qts 0.671
Qms 13.27
Qes 0.74
Vas- cu.ft (liter) 2.87 cu. ft. (81.4 liters)
Xmax- inch (mm) +/- 0.47" (12 mm)
Sensitivity
88 db
Re 3.9 ohms /coil
Power Handling (RMS) 200 watts
Power Handling (Peak) 500 watts
Mounting Diameter - inch (mm) 9" (288mm)
Mounting Depth - inch (mm) 5 5/8" (143mm)
Speaker Displacement - inch (mm) 0.059 cu. ft. (1.7 liters)
Sealed Box Volume - cu. ft. (liter) 0.7 cu. ft.(19.8 liters)
Vented Box Volume - N/R
Port Diameter - N/R
Port Length - N/R
Warranty - Parts One Year
Warranty - Labor One Year
Swez
Replies (0)
Copyright ClubKnowledge 2009 * All Rights Reserved
