The reason for the AC 3.1 is the 13 volt or 20db it puts out as the Pioneer HU only puts out 6.5 volts, and to maximize the amps I want to give them 13 volts, already purchased, should have just gotten the AC overdrive for this purpose much cheaper, and no connection problems. So the crossovers that came with the Polk 650s is better to use than the CDT SatNet-560 Crossovers? and why?brbr SatNet-560 Crossovers:brTransient Optimizedbr" 2-way"Illiptic Topology Transient Optimized" brCrossovers Adjustable Tweeter Settings: For 5" and 6.5" Woofersbr"Gold Plated Block" Terminals for Image Enhancement Tweeter Output."brbr No real specs on the Polk crossover except these: By-passable, vented Outboard 2nd Order x2 (High and Low) Crossover with big, beefy components for better dynamic impact and transparency. Vented Crossover Housing has multiple mounting options (screw or "zip" tie) for the ultimate system installation choices. Mating "fastons" for hassle free connections.
Replies (1)
swez on 06/19/2004 21:29:28
Got it.... think we have already covered these parts of the install. Think you will be very happy with the new CDT H-62 system too. The Polks... they are still very nice products as well. Just not the same level of the game as CDT.
Swez
Replies (1)
swez on 06/19/2004 21:29:28
Got it.... think we have already covered these parts of the install. Think you will be very happy with the new CDT H-62 system too. The Polks... they are still very nice products as well. Just not the same level of the game as CDT.
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
